FTT 111 STUDY GUIDE ACTUAL 2025/2026 Q&A

Inside The Document

FTT 111 STUDY GUIDE ACTUAL 2025/2026 QUESTIONS AND 100% CORRECT ANSWERS When a firearm equipped with a decocker is in the "safe" position, the hammer may fall. - Answer -True Revolvers will lock at about the same time when the _________ is in its ___________ position. - Answer -hammer; cocked Match the numbered step of the fire control group function check with its corresponding description below. - Answer -1: With snap caps in the chamber, set the safety/selector in the "safe" position. 2: Depress the trigger; it will not move. 3: Release the trigger and move to the "fire" position. 4: Depress the trigger again. The hammer/striker will produce an audible "click" 5: Continue to depress the trigger. Manually cycle the action and eject the snap cap. 6: Release the trigger. An audible reset will be heard but the hammer/striker should not move. 7: Use a nylon or rubber hammer and tap the receiver or action. 8: Set the safety and/or selector to the "safe" position; nothing should happen. With a fixed ejector, you must quickly manipulate the action to ensure the round is properly ejected. - Answer -True Some break-action firearms are cocked when the ___________ acts upon the ________ and cocks the ________. - Answer -Lug, Cocking Lever, Hammer. Need assistance on Online classes, Exams & Assignments? Reach out for instant help!! Full Course Assistance, Plagiarism-free Essay Writing, Research Paper, Dissertation, Discussion Posts, etc…. Confidential & Secure services. Tutors are available for all subjects! Email now at: tutorjean01@gmail.com Match the type of cartridge to its proper headspace location. - Answer -Rimfire - Rim of the Case Centerfire pistol cartridge - Leading Edge of the Mouth Bottleneck centerfire rifle cartridge - Datum line, or near the center of the shoulder Belted magnum cartridge - Top of the belt of the case Which type of sear engagement is considered to be the safest? - Answer -Positive Which of the following firearm types "push" the extracted round from the chamber? - Answer -Break action When you use a Field gauge, the action should: - Answer -Not close and not lock Which of the following statements is not true about safety and ammunition? - Answer -Always keep ammunition in the gunsmithing area The initial function check is to be done: - Answer -With no rounds or snap caps Manual actions require the operator to use a moderate to heavy force to close the breech. - Answer -False What happens when you headspace a cartridge with the extractor installed? - Answer -The measurement is reading off the extractor instead of the breech face. Which of the following contribute to a failure to feed? - Answer -Feeding device, action parts, and ammunition Please identify the part indicated below: AK47 Extractor - Answer -Extractor Need assistance on Online classes, Exams & Assignments? Reach out for instant help!! Full Course Assistance, Plagiarism-free Essay Writing, Research Paper, Dissertation, Discussion Posts, etc…. Confidential & Secure services. Tutors are available for all subjects! Email now at: tutorjean01@gmail.com